This product will be available on Amazon.com in April~May. The filters for replacement are still available.
A tip for the new customer: the RO system only contains 3 filters not including the RO membrane. So you should put the system and the 400G RO membrane both into the cart.
Besides of that, don’t forget to put the remineralizer-T55 filter set into cart. You will get the T55 filter set free when you pay and place the order.
Brand new packaging and smarter panel!
We have launched a big new upgrade for PG-400-AZ, now it’s smaller and wrapped by a stronger packaging. We also upgraded the panel’s program to improving the performance of the monitor and the filter-meter.
You forgot to using the attached PTFE tape to fix the leakage at the thread. Just like using the same tape to fix the feed-water-valve’s thread when you working on the installation. Check out our blog to learn more.
The T33 is the coconut activated carbon filter for improving the taste of RO pure water. T55 filter is filled with the mixing coconut activated carbon and remineralizing ore ball. You can buy the T33 universal 10″ filter almost everywhere but not the T55 filter.
A. Long press “reset” button for 3s to start; B. short press “select” button, to choose the bar icon; C. Again, long press the “reset” button for 3s to launch the resetting.
For high-flux RO system, the “TDS creep” is the most noticeable feature. The purify guru RO system got a built-in monitor to automatically make a back-flushing to solve this kind of issue.
When you control the right handle for the pure water, you will hear the small noise of built-in working pump (40-60 dB).
Either 50GPD, 100GPD or 400GPD are RO membrane’s water flow specification, Some people mistakenly believe this is the daily capacity. In fact it is a common mark for distinguish. Here is how we calculate this specification: We make the 400GPD RO membranes filter water for 5-10 minutes. Measure and calculate the water volume: 0.278 gallon…
The picture is the PTFE tape that we attached on the RO system for thread sealing. This is the best product to fix metal pipe sealing issue. You can use it to fix the feed water valve and the 3nd and 4th metal rings of the canisters. You can find a lot of videos about…
When the Purify guru PG-400-AZ didn’t working, if it alert “check”, that’s means the inside presure for RO membrane is not good.There are 2 issues couse the unstable presure: The Wrongly installed RO membrane. The system was working over 100 min. THE WRONGLY INSTALLED RO MEMBRANE. To make sure the installation of RO membrane is…
There is a common issue–tiny leaking, which coused by 2 reasons:A. The RO membrane wasn’t installed well.B. The metal rings are not tight enough. Here are some simple steps and tips to fix this issue: Shut off the valve and open the faucet. It helps to drain the water that inside the tubing. Keep the system…
